Plan the full footprint
Check access and clear space for the chamber, supporting equipment, panel and mat.
Trusted by
A closer look at HBOT Chamber (1.5 ATA) + Red Light Panel + PEMF Mat
Three therapies, one considered setup
A flexible routine
Each product remains independently usable within the complete setup.
Delivered as one setup
The equipment, installation and training are planned together.
What owning one is actually like.
Three manual release valves
Stop the chamber session and depressurise from inside at any time. Three valves, so there is always a backup.
Tested above its working pressure
The 1.5 ATA chamber is tested to 1.7 ATA before delivery.
Controlled, consistent light
Calibrated panel output, spectrometer-measured at 129 mW/cm², with adjustable intensity and eye protection for every session.
Installed and explained
Delivery, set-up and training by Oxydise for all three products, with ongoing UK support.
The chamber
A 1.5 ATA soft-shell chamber in Grade-5 TPU on its steel frame, pressure-tested before it leaves us.
Oxygen concentrator and compressor
A 10 litre a minute concentrator at 90 to 96% oxygen and an air-conditioned compressor, around 60 dB.
The Red Light panel
A full-body panel with five wavelengths, 1,200 LEDs and touch controls.
The infrared PEMF mat
A 73.5 × 185 cm full-body mat with four PEMF programmes from 3 to 23 Hz and heat settings alongside.
Masks, hoses and consumables
Fitted and tested on the day, as part of the installation. Nothing extra to buy.
2-year warranty
Two years on the chamber, panel and mat and 24 months on accessories and electronics, with UK support.
We arrive and set it up
The full set-up comes to the room we planned together, with clear space for the chamber, its equipment, the panel and the mat.
Connect and prove it
Concentrator, compressor and lines go in and the chamber is taken to pressure. The panel and mat are positioned and checked.
Your training
All three routines, the release valves, eye protection and how to sequence them. You run your first session with us in the room.
Chamber first
Around 60 minutes at 1.5 ATA breathing oxygen through the mask. Read, rest or nap.
Then the light
Ten to twenty minutes on the mat under the panel with eye protection on, PEMF and light running together. Warm, not hot.
Or keep them separate
Each product is independently usable. Many people run the panel and mat on days between chamber sessions. We help you find the sequence for your goal.
After each session
Wipe the interior, hang the mask to dry and leave the door open to air. Two minutes, no tools.
Through the year
The concentrator filter is the only part that asks for a regular check, and we remind you when it is due.
We handle the rest
Servicing and technical support come from our UK team, with OxyCare included at no extra cost.
Pennies per session
A session uses roughly 1.3 units of electricity, about 35p at a typical tariff. There are no consumables to buy between sessions.
7–10 working days
From order to installation on UK mainland. We agree the date with you once payment and your delivery form are complete.
Two years of cover
A 2-year manufacturer warranty on the chamber, panel and mat and 24 months on accessories and electronics. OxyCare is included at no extra cost.
Designed around real rooms.
Three therapies, one considered set-up.
Chamber
The 1.5 ATA soft-shell chamber needs its length plus room at the door end to get in and out.
Panel
The 189 × 58 cm panel stands against a wall or on the optional motorised stand.
Mat
The 73.5 × 185 cm mat lies on the floor or a therapy bed in front of the panel, with about a metre of clear space.
Equipment
The concentrator and compressor sit beside the chamber, plugged into standard sockets and running at around 60 dB. The panel and mat are silent.
Full specifications
Chamber
- Working pressure
- 1.5 ATA
- Tested pressure
- 1.7 ATA
- Build
- Grade-5 TPU, glue-free, steel frame
- Oxygen
- 90 to 96%, 10 L per minute
- Compressor
- Air-conditioned, around 60 dB
- Release valves
- Three, manual, inside
Panel and mat
- Panel wavelengths
- 630 and 660 nm red, 810, 830 and 850 nm near-infrared
- Panel LEDs
- 1,200 × 5 W, 129 mW/cm²
- Panel size
- 189 × 58 × 6.5 cm
- Mat size
- 73.5 × 185 cm
- PEMF
- Four programmes, 3 to 23 Hz
- Mat heat
- Adjustable settings
Installation and ownership
- Delivery
- 7 to 10 working days
- Installation and training
- Included
- Warranty
- 2 years, all three products
- Accessories
- 24 months
- OxyCare
- Included for the chamber
- Support
- UK team
Delivery, installation and returns
- Delivery
- 7–10 working days (UK mainland), we agree the date with you once payment and your delivery form are complete.
- Installation & Training
- Included, our team delivers, sets up and tests the full stack (chamber, panel and mat) and walks you through your first sessions.
- Returns
- 14-day return policy for unused products in original packaging.
- International Orders
- Available on request, contact us for quotes and documentation.
Things worth asking before you buy.
The questions we would ask in your position, answered straight.
Oxygen under pressure for repair from the inside, red and near-infrared light for skin, recovery and cellular energy, and PEMF with gentle heat for circulation and settling. The full picture for each is in HBOT explained and Red Light Therapy, explained.
The chamber needs its length plus room at the door end and space beside it for the equipment; the panel and mat need about a metre of clear floor. A spare room or a home gym takes all three comfortably. We check the room and the route in with you before delivery.
Almost certainly. Everything runs from standard wall sockets with no special electrics, and the chamber equipment sits around 60 dB.
A few conditions need a doctor’s ok before hyperbaric sessions, and Red Light Therapy is not for everyone either: photosensitive conditions or medications, pregnancy and epilepsy triggered by pulsed light all need a conversation first. We check this with you before delivery, not after.
There is no single answer. Many people lie on the mat under the panel on the days between chamber sessions, others do a short light session straight after the chamber. Tell us your goal and we will suggest a starting routine.
The results people talk about come from consistency, usually several sessions a week rather than the odd one. If you are not sure yet, rent a chamber or a panel first.
Yes. We set everything up, test it and walk you through a full session of each on delivery day. After that the routines are the same every time.
There is more room inside the chamber than people expect, and most stop thinking about the space within a couple of minutes. You can open a release valve from inside at any time. Come and sit in one first.
Try it before you buy it.
Book a session at an Oxydise wellness lab and test the equipment for yourself — try before you buy, with the team on hand.
1,000+rentals to date
100,000+session hours run
3wellness labs
