Controlled, consistent output
Calibrated panel output, spectrometer-measured at 129 mW/cm² at the surface, for safe, even exposure every session.
Trusted by
Light above, PEMF below.
Panel and mat, one setup.
What owning one is actually like.
Adjustable intensity
Set the panel output and the mat programme to suit the session. More is not better; the right dose is.
Eye protection
Wear eye protection throughout every panel session, and expose the area you are treating rather than clothing.
Set up and explained
Delivered and set up by the Oxydise team, with placement and distance guidance and a starting protocol for both products.
The panel
A 189 × 58 cm full-body panel with 1,200 five-watt LEDs and touch controls on the panel itself.
Five wavelengths
630 and 660 nm red for the surface, 810, 830 and 850 nm near-infrared for depth, combined in one panel.
The infrared PEMF mat
A 73.5 × 185 cm full-body mat with four PEMF programmes from 3 to 23 Hz and heat settings alongside.
Touch controls
Timer and intensity are set by touch on the panel, and the mat has its own controller.
Your customer portal
Your documents, guidance and session protocols in one place.
2-year warranty
Two years on the panel and mat and 24 months on accessories and electronics, with UK support.
We deliver and set it up
UK mainland delivery, typically 7 to 10 working days. The panel and mat are set up, tested and demonstrated by the Oxydise team.
Position and prove it
Placement, distance and angle are set for lying sessions on the mat, then the output is checked before you begin.
Your first session, explained
Timer, intensity, the mat programmes, eye protection and a sensible starting protocol. You run your first session with us there.
Lie on the mat
Lay the mat where you planned, choose a PEMF programme and heat setting, and lie back with your eye protection on.
Set the panel
Choose the time and intensity by touch on the panel above you. Most sessions run 10 to 20 minutes.
Warm, not hot
Light from above and PEMF with gentle heat from below. The timers end the session for you.
After each session
Wipe the panel face, roll or store the mat and leave the set-up ready for next time. A minute, no tools.
Through the year
Keep the vents clear and the surfaces clean. The panel LEDs are rated for 100,000 hours, so there is nothing to replace.
We handle the rest
Technical support and servicing from our UK team, and the protocols in your portal as your routine settles.
Pennies per session
A 20-minute session with the panel at full output and the mat running uses about two units of electricity, roughly 55p at a typical tariff. There are no consumables.
7 to 10 working days
UK mainland delivery, set up by the Oxydise team.
Two years of cover
A 2-year manufacturer warranty on the panel and mat and 24 months on accessories and electronics, with UK support.
Full specifications
Panel
- Wavelengths
- 630 and 660 nm red, 810, 830 and 850 nm near-infrared
- LEDs
- 1,200 × 5 W, rated 100,000 hours
- Irradiance
- 129 mW/cm² at the surface
- Controls
- Timer and intensity by touch
- Panel size
- 189 × 58 × 6.5 cm
- Certification
- CE, UKCA
Mat
- Size
- 73.5 × 185 cm
- PEMF
- Four programmes, 3 to 23 Hz
- Heat
- Adjustable settings
- Power
- Standard UK plug
Installation and ownership
- Delivery
- 7 to 10 working days
- Set-up and training
- Included
- Warranty
- 2 years, panel and mat
- Accessories
- 24 months
- Support
- UK team
Delivery, installation and returns
- Delivery
- 7–10 working days (UK mainland), we agree the date with you once payment and your delivery form are complete.
- Installation & Training
- Included, our team delivers, sets up and tests the panel and mat, and walks you through your first sessions.
- Returns
- 14-day return policy for unused products in original packaging.
- International Orders
- Available on request, contact us for quotes and documentation.
Things worth asking before you buy.
The questions we would ask in your position, answered straight.
Red and near-infrared light send a useful signal to your cells, through mitochondria, at the right dose. Red works at the surface for skin, near-infrared travels deeper into muscle and joints. The full picture, including what the evidence does and does not show, is in Red Light Therapy, explained.
A pulsed electromagnetic field with gentle infrared heat from below while the panel lights you from above. Four programmes cover 3 to 23 Hz, and the heat settings run alongside them.
The panel is 189 × 58 cm and the mat 73.5 × 185 cm, so a clear floor area of about 2 × 1.5 metres takes both, with the panel on its stand over the mat or against a wall. Both run from standard UK plugs.
Red Light Therapy is non-invasive and well tolerated by most people, but not for everyone. Photosensitive conditions or medications, pregnancy, epilepsy triggered by pulsed light, recent injectables, open wounds and implanted devices all need a pause and a conversation first. We check this with you before delivery, not after.
Warm, not hot. You lie on the mat with eye protection on, the panel above you, and let the timers run, usually 10 to 20 minutes.
Consistency beats intensity. A common start is three to five sessions a week, easing to two or three for maintenance. If you are not sure that fits your life yet, rent a panel first.
Yes. The timer and intensity are set by touch on the panel, the mat has its own controller, and the placement and distance guidance covers the rest.
Both deliver red and near-infrared light. A panel is flexible, targeted and practical, with a smaller footprint. A bed surrounds the body for even full-body coverage in one effortless session. The best format is the one that makes the right dose easy to use consistently.
Try it before you buy it.
Book a session at an Oxydise wellness lab and test the equipment for yourself — try before you buy, with the team on hand.
1,000+rentals to date
100,000+session hours run
3wellness labs
